TY - JOUR AU - Matsuno, Takahiro AU - Wang, Zhongkui AU - Hirai, Shinichi PY - 2017 DA - 2017/11/09 TI - Grasping state estimation of printable soft gripper using electro-conductive yarn JO - Robotics and Biomimetics SP - 13 VL - 4 IS - 1 AB - Automatic handling of many types of food materials are required to realize the automation of production of commercially prepared box lunches. A printable soft gripper was developed for food handling which is simple to produce with a 3D printer. However, the sensing ability of the printable soft gripper was not discussed in previous research. In this paper, a novel method for estimating the grasping state of a printable soft gripper using electro-conductive yarn is presented. Electro-conductive yarn is a conductive material, and the resistance of strings is changed by stretching. It is less expensive than other sensors that can be used for measurement of grasping state. Additionally, it is easy to assemble and disassemble by hand. Electro-conductive yarn is applied to a prototype printable soft gripper, and the proposed estimation method is verified experimentally. From the experimental results, the estimated grasping state from the resistance of the electro-conductive yarn coincides with the actual grasping state of the gripper. Our proposed method of using electro-conductive yarn was successful for estimating the grasping state of a printable soft gripper. SN - 2197-3768 UR - https://doi.org/10.1186/s40638-017-0072-4 DO - 10.1186/s40638-017-0072-4 ID - Matsuno2017 ER -