TY - JOUR AU - Tsai, M. J. AU - Chang, J. -. L. AU - Haung, J. -. F. PY - 2005 DA - 2005// TI - Development of an automatic mold polishing system JO - Automation Sci Eng IEEE Trans VL - 2 UR - https://doi.org/10.1109/TASE.2005.853723 DO - 10.1109/TASE.2005.853723 ID - Tsai2005 ER - TY - JOUR AU - Kao, P. AU - Hocheng, H. PY - 2003 DA - 2003// TI - Optimization of electrochemical polishing of stainless steel by grey relational analysis JO - J Mater Process Technol VL - 140 UR - https://doi.org/10.1016/S0924-0136(03)00747-7 DO - 10.1016/S0924-0136(03)00747-7 ID - Kao2003 ER - TY - JOUR AU - Kordonski, W. I. AU - Jacobs, S. PY - 1996 DA - 1996// TI - Magnetorheological finishing JO - Int J Modern Phys B VL - 10 UR - https://doi.org/10.1142/S0217979296001288 DO - 10.1142/S0217979296001288 ID - Kordonski1996 ER - TY - JOUR AU - Sidpara, A. AU - Jain, V. PY - 2011 DA - 2011// TI - Experimental investigations into forces during magnetorheological fluid based finishing process JO - Int J Mach Tools Manufacture VL - 51 UR - https://doi.org/10.1016/j.ijmachtools.2010.12.002 DO - 10.1016/j.ijmachtools.2010.12.002 ID - Sidpara2011 ER - TY - JOUR AU - Wang, B. AU - Zhang, J. AU - Dong, S. PY - 2009 DA - 2009// TI - New development of atmospheric pressure plasma polishing JO - Chinese Optics Lett VL - 7 UR - https://doi.org/10.3788/COL20090706.0537 DO - 10.3788/COL20090706.0537 ID - Wang2009 ER - TY - JOUR AU - Yamamura, K. AU - Takiguchi, T. AU - Ueda, M. AU - Deng, H. AU - Hattori, A. AU - Zettsu, N. PY - 2011 DA - 2011// TI - Plasma assisted polishing of single crystal SiC for obtaining atomically flat strain-free surface JO - CIRP Annals-Manufacturing Technol VL - 60 UR - https://doi.org/10.1016/j.cirp.2011.03.072 DO - 10.1016/j.cirp.2011.03.072 ID - Yamamura2011 ER - TY - JOUR AU - Zhao, J. AU - Zhan, J. AU - Jin, R. AU - Tao, M. PY - 2000 DA - 2000// TI - An oblique ultrasonic polishing method by robot for free-formsurfaces JO - Int J Mach Tools Manufacture VL - 40 UR - https://doi.org/10.1016/S0890-6955(99)00112-1 DO - 10.1016/S0890-6955(99)00112-1 ID - Zhao2000 ER - TY - JOUR AU - Zhao, M. AU - Li, Y. AU - Kao, H. T. PY - 2012 DA - 2012// TI - Design and dynamic analysis of horn for ultrasonic polishing JO - Appl Mech Mater VL - 121 ID - Zhao2012 ER - TY - JOUR AU - Cheung, C. AU - Kong, L. AU - Ho, L. AU - To, S. PY - 2011 DA - 2011// TI - Modelling and simulation of structure surface generation using computer controlled ultra-precision polishing JO - Precision Eng VL - 35 UR - https://doi.org/10.1016/j.precisioneng.2011.04.001 DO - 10.1016/j.precisioneng.2011.04.001 ID - Cheung2011 ER - TY - JOUR AU - Shu, Y. AU - Nie, X. AU - Shi, F. AU - Li, S. PY - 2014 DA - 2014// TI - Smoothing evolution model for computer controlled optical surfacing JO - J Optical Technol VL - 81 UR - https://doi.org/10.1364/JOT.81.000164 DO - 10.1364/JOT.81.000164 ID - Shu2014 ER - TY - JOUR AU - Zhan, J. AU - Zhao, J. AU - Xu, S. AU - Zhu, P. PY - 2002 DA - 2002// TI - Study of the contact force in free-form-surfaces compliant EDM polishing by robot JO - J Mater Process Technol VL - 129 UR - https://doi.org/10.1016/S0924-0136(02)00640-4 DO - 10.1016/S0924-0136(02)00640-4 ID - Zhan2002 ER - TY - JOUR AU - Jones, R. A. PY - 1977 DA - 1977// TI - Optimization of computer controlled polishing JO - Appl Optics VL - 16 UR - https://doi.org/10.1364/AO.16.000218 DO - 10.1364/AO.16.000218 ID - Jones1977 ER - TY - JOUR AU - Cheng, H. PY - 2010 DA - 2010// TI - An investigation of the effects of the tool path on the removal of material in polishing JO - J Mater Process Technol VL - 210 UR - https://doi.org/10.1016/j.jmatprotec.2010.01.012 DO - 10.1016/j.jmatprotec.2010.01.012 ID - Cheng2010 ER - TY - JOUR AU - Wang, W. AU - Yun, C. PY - 2011 DA - 2011// TI - A path planning method for robotic belt surface grinding JO - Chin J Aeronaut VL - 24 UR - https://doi.org/10.1016/S1000-9361(11)60060-5 DO - 10.1016/S1000-9361(11)60060-5 ID - Wang2011 ER - TY - JOUR AU - Zheng, D. AU - Lu, F. AU - Zhang, L. Z. AU - Shi, Y. J. PY - 2012 DA - 2012// TI - The effect of polishing tool path on polishing parameters JO - Appl Mech Mater VL - 101 ID - Zheng2012 ER - TY - JOUR AU - Pan, R. AU - Yang, W. AU - Guo, Y. B. AU - Yang, F. AU - Zhang, D. X. PY - 2012 DA - 2012// TI - Research on the optimized tool-path planning of computer controlled optical surfacing JO - Adv Mater Res VL - 399 ID - Pan2012 ER - TY - JOUR AU - Rososhansky, M. AU - Xi, F. J. PY - 2011 DA - 2011// TI - Coverage based tool-path planning for automated polishing using contact mechanics theory JO - J Manufacturing Syst VL - 30 UR - https://doi.org/10.1016/j.jmsy.2011.05.003 DO - 10.1016/j.jmsy.2011.05.003 ID - Rososhansky2011 ER - TY - BOOK AU - Marinescu, I. D. AU - Uhlmann, E. AU - Doi, T. PY - 2006 DA - 2006// TI - Handbook of lapping and polishing PB - CRC Press CY - New York UR - https://doi.org/10.1201/9781420017632 DO - 10.1201/9781420017632 ID - Marinescu2006 ER - TY - JOUR AU - Tsai, M. -. J. AU - Fang, J. AU - Chang, J. -. L. PY - 2006 DA - 2006// TI - Robotic path planning for an automatic mold polishing system JO - Int J Robot Automation VL - 19 ID - Tsai2006 ER - TY - JOUR AU - Li, H. AU - Walker, D. AU - Yu, G. AU - Zhang, W. PY - 2013 DA - 2013// TI - Modeling and validation of polishing tool influence functions for manufacturing segments for an extremely large telescope JO - Appl Optics VL - 52 UR - https://doi.org/10.1364/AO.52.005781 DO - 10.1364/AO.52.005781 ID - Li2013 ER - TY - JOUR AU - Cheng, H. PY - 2010 DA - 2010// TI - An investigation of the effects of the tool path on the removal of material in polishing JO - J Mater Process Technol VL - 210 UR - https://doi.org/10.1016/j.jmatprotec.2010.01.012 DO - 10.1016/j.jmatprotec.2010.01.012 ID - Cheng2010 ER - TY - JOUR AU - Lambropoulos, J. C. AU - Jacobs, S. D. AU - Ruckman, J. PY - 1999 DA - 1999// TI - Material removal mechanisms from grinding to polishing JO - Ceram Trans VL - 102 ID - Lambropoulos1999 ER - TY - JOUR AU - Lin, S. -. C. AU - Wu, M. -. L. PY - 2002 DA - 2002// TI - A study of the effects of polishing parameters on material removal rate and non-uniformity JO - Int J Mach Tools Manufacture VL - 42 UR - https://doi.org/10.1016/S0890-6955(01)00089-X DO - 10.1016/S0890-6955(01)00089-X ID - Lin2002 ER - TY - JOUR AU - Tseng, W. -. T. AU - Wang, Y. -. L. PY - 1997 DA - 1997// TI - Re-examination of pressure and speed dependences of removal rate during chemical-mechanical polishing processes JO - J Electrochemical Soc VL - 144 UR - https://doi.org/10.1149/1.1837417 DO - 10.1149/1.1837417 ID - Tseng1997 ER - TY - JOUR AU - Nanz, G. AU - Camilletti, L. E. PY - 1995 DA - 1995// TI - Modeling of chemical-mechanical polishing: a review JO - Semiconductor Manufacturing IEEE Trans VL - 8 UR - https://doi.org/10.1109/66.475179 DO - 10.1109/66.475179 ID - Nanz1995 ER - TY - CHAP AU - Li, B. AU - Lin, W. AU - Yang, X. AU - Deng, Z. PY - 2010 DA - 2010// TI - Kinematic analysis and design for a 4URHU-1URHR parallel kinematic polishing machine BT - Proceedings of CLAWAR PB - World Scientific CY - Nagoya, Japan ID - Li2010 ER - TY - JOUR AU - Lin, W. AU - Li, B. AU - Yang, X. AU - Zhang, D. PY - 2013 DA - 2013// TI - Modelling and control of inverse dynamics for a 5-DOF parallel kinematic polishing machine JO - Int J Advanced Robot Syst VL - 10 ID - Lin2013 ER - TY - CHAP AU - Li, B. AU - Li, G. AU - Lin, W. AU - Xu, P. PY - 2014 DA - 2014// TI - Design and constant force control of a parallel polishing machine BT - In: Information Science and Technology (ICIST) ID - Li2014 ER -